Designed as a seamless two piece aluminum body,
The LAVATUBE v2.5 e-cigarette houses an upgraded chipset from its predecessor
offering up to 6 volts and 15 watts of power. Complete with a resistance reader
and battery gauge, the bright white and blue LCD display is easy to navigate.
Choose between 10 anodized color finishes.
The device you've always wanted is finally here.
It's time to take your vaping experience to the next level with a device tuned
like no other. The all new LAVATUBE v2.5 is a specially designed electronic
cigarette that lets you fully control your vaping experience with a few clicks
of our easy to use buttons. Our team spent many months designing this device and
there are many high tech features that separate the LAVATUBE v2.5 from the
crowd. Here are the full set of specs:
LAVATUBE v2.5 Features:
-
NEW: Variable Voltage & Variable Wattage
- NEW: Power output
mode: vRMS
- NEW: Device memory
that stores your settings
- Lightweight aluminum alloy body
- Anodized aluminum finish
- 1 power / activation button
- 1 Voltage up button
- 1 Voltage down button
- 1 Bright blue LCD screen
- 1 510 threaded connection
- 1 Lanyard clip hole
- 2 vent holes
- 18650 battery compatibility
Tech Specs:
- Selectable
Voltage Range: 3v to 6v
in 0.1v increments
- Selectable
Wattage Range: 3w to 15w
in 0.5w increments
- Power /
Activation Button: Click
five times fast to power the device on / off; Hold the button down to
activate.
- + Button:
On press, increases voltage/wattage.
- - Button:
On press, decreases voltage/wattage.
- Power Output
Mode: vRMS.
- Auto Shutoff:
If the activation button is held down for 15 seconds or longer, the LAVATUBE
will shut itself off until the button is released to prevent overheating the
atomizer and the device.
- Short
Circuit/Atomizer Protection:
The LAVATUBE can recognize an atomizer with too low of a resistance for the
current voltage setting and will drop the voltage/wattage to a low enough
setting to protect both the battery and atomizer. If the atomizer is too low
or shorted out, it will shut off power to the device to protect the LAVATUBE
from being damaged.
- Reverse Battery
Protection: Protects the
device in case you put the battery in the device backwards
- Battery
Monitoring/Over-Discharge Protection:
The device will monitor the battery voltage and automatically display "LO"
on the display and turn off when the battery is discharged, preventing
damage to the battery and the device by over depletion.
- Battery Voltage
Meter: The LAVATUBE has a
voltage meter built in. This way you can monitor the power left in the
battery before it needs to be recharged. (18650
batteries provide 4.2v at peak charge and over the life of the battery that
voltage will decrease to about 3.2v level before needing to be recharged)
This will help you monitor the life cycle of the battery.
- Atomizer Ohm
Meter: The LAVATUBE has
an atomizer ohm meter built in. It will display the ohm's resistance of the
atomizer that is connected to the device.
- Amperage
Limiting: 3 amps – The
device should monitor and shut itself off if it detects any excessive
over-current conditions.
- Vent holes:
2 Vent holes on the bottom of the device for added safety.